2000 xj. Sorry in advance for long post. About 5 months ago installed snorkel and trimmed fenders. Did away with Fender mounted washer res. Saved pump's. Just bought a coolant res. to relocate as roads are terrible here. The wiring harness has two connectors. One fits and one only has one slot. I can get the rear pump to spin but not the front. There is little to no suction from the rear pump so it does not spit fluid out. The fuse is a 20 amp relay. Not sure how to check it. I plugged in a working 25 amp and still nothing. I'm at a loss here. Any ideas? Older models I can swap in with internal pump maybe? Any help would be great. Thanks.

 

30 views and nothing. No one has dealt with this. BUMP.

 

I replaced both of my washer pumps a few months ago. I believe one or both of the pumps required a pigtail adapter, which was included with pump, to fit the electrical harness, you can see the pigtail in this picture: http://www.autozone.com/autozone/par...5576_193814_0_

 

I replaced both off mine a few years ago. Or less. But the pumps I got from Oriley's burg were plug in. No wiring adapter. After the change you may have clogged the pump. Maybe try cleaning them?