Warn quick-disconnects
Thread Starter
CF Veteran
Joined: Sep 2010
Posts: 2,844
Likes: 0
From: Warsaw, IN
Year: 2000,1990,1999
Model: Cherokee
Engine: 4.0
Has anybody used these quick-disconnects? One guy said their junk, don't get a good connection after they get a little dirty?
http://cgi.ebay.com/ebaymotors/ws/eB...d=390169525854
http://cgi.ebay.com/ebaymotors/ws/eB...d=390169525854
CF Veteran
Joined: Mar 2010
Posts: 1,200
Likes: 0
From: wilkes barre PA.
Year: 96
Model: Cherokee
Engine: 6 cylinder
$40 for 1, I wouldn't even think about it. Y don't you go to the JY and just snip both ends of a wiring harness, pull the old wires and put in new ones for what you disconnecting.
Thread Starter
CF Veteran
Joined: Sep 2010
Posts: 2,844
Likes: 0
From: Warsaw, IN
Year: 2000,1990,1999
Model: Cherokee
Engine: 4.0
for one set. There's cheaper off-brand ones. I'm using 2awg wire. It's for a warn m8000.
They are junk bought them and out of the box they wouldn't even clip together. they just slid right apart. Gave them away to someone and they never used them ether. So just like every thing else they make over priced JUNK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thread Starter
CF Veteran
Joined: Sep 2010
Posts: 2,844
Likes: 0
From: Warsaw, IN
Year: 2000,1990,1999
Model: Cherokee
Engine: 4.0
Trending Topics
Senior Member
Joined: May 2010
Posts: 889
Likes: 2
From: Detroit, MI
Year: 1994
Model: Cherokee
Engine: 4.0
GOOGLE it. Here's the same thing for 20 bucks. I'm sure you'll find them cheaper yet.
http://www.hrpworld.com/googlebase.c...action=product
Or use these: http://paceperformance.com/i-5021924...nce-74104.html
or
http://www.stockcarproducts.com/gauge7.htm
or
http://www.summitracing.com/parts/MOR-74201
http://www.hrpworld.com/googlebase.c...action=product
Or use these: http://paceperformance.com/i-5021924...nce-74104.html
or
http://www.stockcarproducts.com/gauge7.htm
or
http://www.summitracing.com/parts/MOR-74201
Thread Starter
CF Veteran
Joined: Sep 2010
Posts: 2,844
Likes: 0
From: Warsaw, IN
Year: 2000,1990,1999
Model: Cherokee
Engine: 4.0
Thread Starter
CF Veteran
Joined: Sep 2010
Posts: 2,844
Likes: 0
From: Warsaw, IN
Year: 2000,1990,1999
Model: Cherokee
Engine: 4.0
GOOGLE it. Here's the same thing for 20 bucks. I'm sure you'll find them cheaper yet.
http://www.hrpworld.com/googlebase.c...action=product
doesn't say what size wire accepted
Or use these: http://paceperformance.com/i-5021924...nce-74104.html
100 amps?
or
http://www.stockcarproducts.com/gauge7.htm
MORE THAN THE WARNS!
or
http://www.summitracing.com/parts/MOR-74201
http://www.hrpworld.com/googlebase.c...action=product
doesn't say what size wire accepted
Or use these: http://paceperformance.com/i-5021924...nce-74104.html
100 amps?
or
http://www.stockcarproducts.com/gauge7.htm
MORE THAN THE WARNS!
or
http://www.summitracing.com/parts/MOR-74201
CF Veteran
Joined: Feb 2010
Posts: 2,095
Likes: 3
From: Cove, OR
Year: 1993
Model: Cherokee
Engine: 4.0
I have my winch set up using them. Mine were 78.00 for the 7 foot of cable and the quick disconnects. They are great, I used them when I had a short and didn't want to fry my winch, and one time when I changed the mounting bracket for my winch. If they get dirt inside the disconnect I'm sure they wouldn't make a good connection. ( Need to be smart enough to clean dirt out of electrical stuff, always makes it work better. )
Thread Starter
CF Veteran
Joined: Sep 2010
Posts: 2,844
Likes: 0
From: Warsaw, IN
Year: 2000,1990,1999
Model: Cherokee
Engine: 4.0
Ok. I found a better replacement! Cheaper and better! http://cgi.ebay.com/CONNECTOR-CONTAC...item3f037c6b1b
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



