Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Vibration over 45mph

Thread Tools
 
Search this Thread
 
Old Sep 6, 2012 | 09:57 AM
  #1  
onecrazyblackredneck's Avatar
Thread Starter
Newbie
 
Joined: Sep 2012
Posts: 5
Likes: 0
From: Lenoir City TN
Year: 1995
Model: Cherokee
Engine: 4.0
Default Vibration over 45mph

Hello everyone, I just bought a cherokee xj 95 with a 4.5" rustys lift, around 45mph and above it has a vibration in the floor pretty bad but it is not in the steering wheel which leads me to believe the transmission mount or Ujoints are bad, any suggestions? It does have the transfer case drop down kit installed. tires are 32" bighorns but I dont think it is the tires . Any help on what to check and where to start would be appreciated.

Happy wheeling
Reply
Old Sep 6, 2012 | 02:12 PM
  #2  
ZINGGG's Avatar
CF Veteran
 
Joined: Oct 2011
Posts: 4,440
Likes: 3
From: Seal Beach, CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Default

Grab the driveshafts and shake them. They should be nice and tight. If not, you're looking at new u-joints.

Push up and down on the transmission. If there's any movement, you should go ahead and replace that mount. Easy to do.

Also take a look at your motor mounts.

Also at 4.5" of lift, you ideally want to get an SYE in there. That will more than likely help your vibes too.
Reply
Old Sep 6, 2012 | 06:24 PM
  #3  
onecrazyblackredneck's Avatar
Thread Starter
Newbie
 
Joined: Sep 2012
Posts: 5
Likes: 0
From: Lenoir City TN
Year: 1995
Model: Cherokee
Engine: 4.0
Default

Thanks , guess i will be replacing ujoints and trans mount, both have play. I was thinking about installing a sye , just really need to do some research on how bad it is to install one. Doesnt look to bad
Reply
Old Sep 6, 2012 | 06:31 PM
  #4  
RTorrez1's Avatar
CF Veteran
 
Joined: Sep 2011
Posts: 4,172
Likes: 4
From: Riviera, Texas
Year: 1998 Sport
Model: Cherokee
Engine: 4.0
Default

Replacing you bad u-joints and trans mount may take away any vibrations that you have. Sorry I can't help you sye. I have never done that, At least not yet.
Reply
Old Sep 6, 2012 | 06:34 PM
  #5  
ZINGGG's Avatar
CF Veteran
 
Joined: Oct 2011
Posts: 4,440
Likes: 3
From: Seal Beach, CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Default

Well replace the u-joints and tranny mount and see what good that does. If you still have bad vibes after that, may be time for an SYE. Lemme look up some write ups for you. I know YouTube actually has a lot of good step by step videos but my work blocks it so I can't look that up for you quite yet. I've never done one myself but it doesn't seem all too bad.
Reply
Old Sep 6, 2012 | 06:38 PM
  #6  
ZINGGG's Avatar
CF Veteran
 
Joined: Oct 2011
Posts: 4,440
Likes: 3
From: Seal Beach, CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Default

http://liftyourxj.com/sye

http://mikestrawbridge.com/blog/2010...ye-in-a-np231/

http://www.4x4xplor.com/SYE-CV.html (In a TJ but same process)
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Busterboy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
Apr 20, 2018 05:38 PM
toasterknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
33
May 21, 2016 07:03 AM
ROCKRIDGE 4WD
Vendor Showcase
1
Apr 7, 2016 06:06 PM
mechanac3
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
6
Dec 18, 2015 02:52 PM
Lightning_19k
Modified XJ Cherokee Tech
14
Oct 3, 2015 09:52 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:20 AM.