vacuum lines
Thread Starter
Junior Member
Joined: Sep 2012
Posts: 45
Likes: 0
From: Arkansas
Year: 1994
Model: Cherokee
Engine: 4.0l
Anyone have a diagram of where the vacuum lines should go on a 94 jeep cherokee xj 4.0l? Ive been rebuilding this jeep and i dont think i have the vacuum lines right, it idles, but it is randomly a low or high idle and when you rev, it wants to die when you let off the gas
Member
Joined: May 2009
Posts: 247
Likes: 2
From: Northern Illinois
Year: 1997
Model: Cherokee
Engine: 4.0L
Yep, start by cleaning your Idle Air Controller first. I tried cleaning mine but had to end up replacing it...settled down the idle issues. Also, clean your throttle body bore and plate with a soft toothbrush and TB cleaner (both side of the plate). After you do both of those, then look at your vacuum routing.
Thread
Thread Starter
Forum
Replies
Last Post
DieselDaze
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 30, 2015 06:42 PM
ToxicFox
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Sep 27, 2015 06:56 PM
Endlessknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Sep 26, 2015 03:20 PM
Joshuapn
Other Vehicles. Other Jeep models & cars and trucks of other makes
1
Sep 25, 2015 08:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



