Update: Newbie with clutch problem
05-03-2009, 08:06 PM
#1
Newbie
Thread Starter
Join Date: Mar 2009
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Update: Newbie with clutch problem
Ok, so I put this job off as long as I could. The old hydraulic system, which is unserviceable on a 96, needed replacement (my guess). So I pull the old cylinders and line out but the line is fed under several other hoses and lines on the firewall. If I install the new one over the top of everything else, I'm about 2" closer to exhaust manifold heat. Any problem there? It would be a major PITA to disconnect everything else to feed the line (with cylinder attached) to the original location. Any suggestions? Thanks and sorry this is so long.
Thread
Thread Starter
Forum
Replies
Last Post
jmarzo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
10-18-2022 04:11 PM
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
03-17-2022 02:15 PM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
Jeepy11
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2015 09:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)