U-Bolts problem!! Where to buy???
#1
Newbie
Thread Starter
Join Date: Feb 2010
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
U-Bolts problem!! Where to buy???
Alright so my 3" lift kit did not come with U-bolts which doesn't make much sense to me but whatever....
OOK so I need the U-Bolts to fit the (8 3/4) 99' Jeep Cherokee rear axle size.
The measurements are 1/2" x 3" x 8"...
Does anyone know where I can order them, or better yet buy them at a local auto store because I called my local PepBoys and they didnt have it...
So any help would be appreciated and fast because im putting on the lift kit in a couple of days!!!
- peeJ
OOK so I need the U-Bolts to fit the (8 3/4) 99' Jeep Cherokee rear axle size.
The measurements are 1/2" x 3" x 8"...
Does anyone know where I can order them, or better yet buy them at a local auto store because I called my local PepBoys and they didnt have it...
So any help would be appreciated and fast because im putting on the lift kit in a couple of days!!!
- peeJ
#3
CF Veteran
#6
CF Veteran
call up a local spring shop, they can custom make you a set right on site. they're better quality than store bought and are fine thread for a stronger app.
#7
CF Veteran
Join Date: Sep 2009
Location: ☼ Blackhole Sun
Posts: 8,567
Likes: 0
Received 18 Likes
on
16 Posts
Year: My Jeep is a GMC
It's a kit with blocks & u-bolts.
Trending Topics
#9
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
What you need to do is find a place that makes parts for 18 wheelers..We have one locally and I took my ubolts to them and they made me a whole new set longer and they are way stronger then anything that comes in these lift kits.
#10
Member
Join Date: Jan 2010
Location: Northeast Pa
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 HO
Go to NAPA is the best response yet. If you go and they cant figure it out just PM me and Ill get you a part number tommorow if they cant figure it out. Just tell them to look on the back of a u bolt box, all the sizes are listed there. Just tell them the numbers start with 650- in the balkamp isle.
#12
Member
Join Date: Jan 2010
Location: Northeast Pa
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0 HO
I like that, I have a truck repair center not far from my home and store I will ask about having stuff like that made up, I get asked alot for rigged up u bolts thats good to know. I am really enjoying this forum for the past few months I have be reading. Great info and Ideas from every angle.
#13
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
The place I went to charged me $22 for a set. They threaded them on site and bent them. I figure if the are the same thing they use on big rig axles they should hold up on my Jeep. I also compared them to the ubolts RE sent with my lift and I can tell a huge difference. Also they have yet to show any signs of rust.
#14
Senior Member
Join Date: Oct 2009
Location: Sutton, New Hampshire
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L
This. The wrong u-bolts came with my lift kit, so I took a trip down to a spring shop not too far away with the measurements I needed, and he had a set fabbed up in about 5 minutes, tops. Cost me $30. Make friends with them, if you can...their help can be invaluable sometimes.