Turning Flexplate to check bolts

Reply Subscribe

Thread Tools

Search this Thread

Jun 3, 2018 | 04:21 PM

ThunderThighs

Thread Starter

Seasoned Member

Joined: May 2011

Posts: 370

Likes: 2

From: Calgary, AB

Year: 99

Model: Cherokee

Engine: 4.0

Turning Flexplate to check bolts

Hey so I’m trying to inspect the little bolts on my flex plate but I can’t seem the turn the thing.
should I have the tranny in neutral?
do I disconnect the battery and then try to turn the crank with a ratchet?
any help would be very appreciated.
thanks

Jun 3, 2018 | 04:45 PM

BlueRidgeMark

CF Veteran

Joined: May 2012

Posts: 7,965

Likes: 964

From: Lost in the wilds of Virginia

Year: 1998 Classic (I'll get it running soon....) and 02 Grand

Model: Cherokee (XJ)

Engine: 4.0

Quote:

Originally Posted by ThunderThighs

should I have the tranny in neutral?

Yes.

Quote:

Originally Posted by ThunderThighs

do I disconnect the battery

Yes, that's one way. Disconnect the ground cable. OR, locate your ASD relay (in the PDC) and pull it.

Quote:

Originally Posted by ThunderThighs

and then try to turn the crank with a ratchet?

Yes, that's one way. OR, if you have pulled the ASD relay, you can bump the starter with the ignition switch to move it around. With the ASD relay pulled, it will not start.