transmission harness
04-02-2015, 06:56 PM
#1
Newbie
Thread Starter
Join Date: Mar 2015
Location: saline Mi
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 96'
Model: Cherokee
Engine: 4.0 H.O
transmission harness
Ok so when i bought my jeep, a 96' the po said it had a manual valve body in it. But after i've had it for a month now i got to thinking he lied lol.(or at least was misinformed) I did a lot of research and i figured it was a bad tcu. So i pulled apart my dash and checked the tcu harness for twelve volts. Right on the money there . So i climbed under and just to make sure and i found the harness that connects to the solenoids wasn't even connected! So i decided to plug it in, seemed the reasonable thing to do. But there doesn't seem to be any place to plug it in. I took some pictures of what i think might be it but it has seven wires, the one from the trans has five. Here are some pictures any help would be awesome. Pictures are left side of the fire wall and i think the engine was replaced with a newer 4.0
Last edited by rexamus; 04-02-2015 at 06:59 PM. Reason: more info
04-03-2015, 09:16 AM
#2
Newbie
Thread Starter
Join Date: Mar 2015
Location: saline Mi
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 96'
Model: Cherokee
Engine: 4.0 H.O
Bump.... ok so the connectors are right but the wire colors don't match does anyone know the correct colors to match
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
Brandonrcm
Accessories
10
12-02-2015 07:48 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)