transfer case vacuum lines
09-20-2011, 07:48 PM
#1
Member
Thread Starter
Join Date: Aug 2010
Location: Richlands, NC/Charlotte, NC yeah I live in 2 places YUNVME?
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 I6 H.O.
transfer case vacuum lines
So, my buddy bought a wrangler that has the vacuum connected front dana 30 with the 2 piece shaft. The previous owner disconnected the vacuum lines. The front driveshaft is still on. If you put it in 4 low, then it makes these horrible clunking noises (can't tell if it is the axle, diff, or tranny case). if the axles were different gear ratios, i know it would cause a problem, but even if the driveshaft was connected it would cause a problem even in 2wd correct?
the problem only occurs in 4wd, but we are trying to rerun the vacuum lines so he will have 4wd and can go wheeling with me, and i have a 97 that lacks this same setup, so it's new to me.
SO my question is, why did he cut these lines off, and what could the noise be?
the problem only occurs in 4wd, but we are trying to rerun the vacuum lines so he will have 4wd and can go wheeling with me, and i have a 97 that lacks this same setup, so it's new to me.
SO my question is, why did he cut these lines off, and what could the noise be?
Thread
Thread Starter
Forum
Replies
Last Post
Calikingcrawler
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-07-2021 07:14 AM
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-26-2020 12:59 PM
eepjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-06-2020 03:19 PM
Shire_Man
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
09-15-2015 02:29 AM
bufbarnaby
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
09-14-2015 09:14 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)