Transfer case handle
10-13-2015, 01:21 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2015
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Transfer case handle
I've seen a lot of pictures of guys changing the Transfer case handle but how do you get the stock leather handle off? I've tried pulling on it but it doesn't move, I was able to get the shifter **** off but not the transfer case handle.
10-13-2015, 07:42 AM
#2
CF Veteran
Join Date: Jan 2015
Location: Southern Maryland
Posts: 1,381
Likes: 0
Received 1 Like
on
1 Post
Year: 1991
Model: Cherokee
Engine: 1999 4.0L
The transfer case grip doesn't come off. You have to remove the lever from the shift rod. Its not hard, just take off the center console and loosen the hardware, the handle has a round end that slips through the main rod, and a spring holding it down.
You can cut the rubber grip and machine the lever, so that it will accept a different ****. Round it down with a file and thread it with a die, and screw something on.
You can cut the rubber grip and machine the lever, so that it will accept a different ****. Round it down with a file and thread it with a die, and screw something on.
Thread
Thread Starter
Forum
Replies
Last Post
cherokeexj21
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
15
10-14-2015 09:04 AM
BlvdKreeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
10-13-2015 06:28 AM
FS[MidWest]: 94 Stock 4.0 Throttle Body - No Sensers.
Codenamefa
Engines/Tranny/T-Case
0
10-12-2015 10:39 PM
'90Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
10-12-2015 07:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)