4x4dude16

well i pulled a trans form a local pick n pull, and this is what was in the trans pan when i took it off any ideas?

SILENT_SOUL

I dont know what i is but I bet there is more of it that hasnt reached the pan.......I try but dont always drop the pan before buying trans's from pick and pulls as well. My buddy bought a trans dropped the pan and it was literally full of a mud/tar residue.

weebur

Any ideas? Yep, take that POS back. See if they have another one, this time pull the pan, look for debris/condition of the oil and check the solenoids with a digital meter (11-15 ohms) before you bring it home.

4x4dude16

Crazy rays doesn't allow returns. Next question if I get a trans from a 99 with it work with my transfer case that's from a 95?

DieselD

They should at least let you pull another one. If they don't take it to the scrap yard.

DieselD

It should fit fine but I'm not sure if there's any difference in the wiring. Might be able to cut and splice it they don't just plug up.

4x4dude16

That's the plan I'm scrapping the old rear and front beam and the old 2wd and this junk 4wd trans, my gfs parents own a scrap yard so hopefully I make some money back