The front of my Jeep has about 6 inches of lift and plan on raising the front back up to 7 but my track bar is too short right now causing my axle to be off-centered. I need a track bar that is long enough but doesn't require the track bar mount and pitman arm to be lowered. I kept those at the stock height. I don't want to have to put another pitman arm on. I've seen the KOR Track bar but I can't tell it lowers the mount at all (further than the stock one). I can't find anyone else that makes one for that much lift.

 

If your going to keep those two things at stock height (can't believe your not having issues now) your going to have problems, or I should say more problems.


You need to rethink your lift IMHO.

 

I haven't had any problems at all. I can flex a lot also. I found another place that makes them and he recommends leaving that at the stock height because lowering them makes it weaker because there is more leverage.

 

I might suggest you do a search here then to see the many posts about these items.........Or just go with that person told you, personally I would not.


Good Luck.