trac bar....
Thread Starter
Senior Member
Joined: Aug 2009
Posts: 674
Likes: 0
From: McCall Idaho!
Year: 97
Model: Grand Cherokee
Engine: 5.2
trac bar....
I put a new axle under the front of my jeep today... its a 93 auto 3.55 dana 30 and the trac bar wont aligne... with my trac bar from my 95?
CF Veteran
Joined: May 2008
Posts: 5,188
Likes: 6
From: Bristol,Pa
Year: 94
Model: Cherokee
Engine: 4.0L
Rig on it's wheels?
Start it, rotate the steering wheel while someone inserts the bolt once the holes line up. Turning the wheel will move the body over the axle to allow you to insert it.
Start it, rotate the steering wheel while someone inserts the bolt once the holes line up. Turning the wheel will move the body over the axle to allow you to insert it.
CF Veteran
Joined: Jan 2011
Posts: 1,894
Likes: 4
From: Las Vegas
Year: 1999
Model: Cherokee
Engine: 4.0
This might help....
GL
Aim your wheels straight. It is the only way you can get an accurate measurement.
1. Get a ratchet strap. If you don't have one, you need one and you'll have other uses for it anyway. Drink a beer.
2. Attach the trac bar to the frame but leave the axle end loose. Drink a beer.
3. Wrap the strap around your frame where the trac bar attaches and the other end around the tire that is sticking further out. Drink a beer.
4. Tighten the ratchet strap. As you do, it will pull the body toward the center of the axle. Drink a beer.
5. When the body is perfectly centered over the axle, adjust your bar to fit the axle bracket and install the trac bar to the axle. Drink a beer.
6. You will need to adjust the drag ling to get your steering wheel straight. If you drank a beer at each step, I would suggest road testing later.
1. Get a ratchet strap. If you don't have one, you need one and you'll have other uses for it anyway. Drink a beer.
2. Attach the trac bar to the frame but leave the axle end loose. Drink a beer.
3. Wrap the strap around your frame where the trac bar attaches and the other end around the tire that is sticking further out. Drink a beer.
4. Tighten the ratchet strap. As you do, it will pull the body toward the center of the axle. Drink a beer.
5. When the body is perfectly centered over the axle, adjust your bar to fit the axle bracket and install the trac bar to the axle. Drink a beer.
6. You will need to adjust the drag ling to get your steering wheel straight. If you drank a beer at each step, I would suggest road testing later.
Thread
Thread Starter
Forum
Replies
Last Post
Shire_Man
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
Sep 15, 2015 02:29 AM
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Aug 30, 2015 08:06 PM
AKghandi
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Aug 28, 2015 02:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)