Tow points?
Thread Starter
CF Veteran

Joined: Sep 2008
Posts: 5,025
Likes: 0
From: Palestine, TX
Year: 1988
Model: Cherokee
Engine: 4.0
Ok i know what tow points do, but what do they look like? where do i mount them? do i got to fab them? weld them? can i buy them? HELP!





thanks,
4X4 Newbie





thanks,
4X4 Newbie
::CF Administrator::
Joined: May 2008
Posts: 10,039
Likes: 16
From: Okc area
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Here are some I kno XJStryker used..
http://www.hicountryoffroad.com/Prod...r_recovery.htm
Also http://custom4x4fabrication.com/towhookbrackets.jpg
http://www.hicountryoffroad.com/Prod...r_recovery.htm
Also http://custom4x4fabrication.com/towhookbrackets.jpg
Renix Super Guru
Joined: Mar 2008
Posts: 24,653
Likes: 19
From: In yourz postez fissin jurr spelinzs
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
They mount to the unibody with a long piece of steel that then mounts a set of hooks or clevis's like the ones you see in XJ Stryker's avatar. They can often be found in a junkyard but there are manufacturers which sell aftermarket ones. HERE
CF Veteran
Joined: May 2008
Posts: 2,495
Likes: 3
From: Edmond, OK
Year: 1993
Model: Cherokee
Engine: 4.0 ltr
They are also included on MOST aftermarket bumpers...
The one I would like to get.. with tow points and 2" receiver. http://www.jcroffroad.com/Merchant2/...egory_Code=XJB
The one I would like to get.. with tow points and 2" receiver. http://www.jcroffroad.com/Merchant2/...egory_Code=XJB
Trending Topics
Renix Super Guru
Joined: Mar 2008
Posts: 24,653
Likes: 19
From: In yourz postez fissin jurr spelinzs
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Excellent. We all thought you had crawled all under your junk just like we did when we got ours. Glad you got them. You need to make a through inspection of every part of yor XJ.
Thread Starter
CF Veteran

Joined: Sep 2008
Posts: 5,025
Likes: 0
From: Palestine, TX
Year: 1988
Model: Cherokee
Engine: 4.0
I did, but i am new to all of this, so i was looking for problems, not even knowing what the aftermarket stuff was! and lol I dont got "junk".
I am just learning alot from u guys and slowly exploring my new found toy!
CF Veteran
Joined: Sep 2008
Posts: 2,418
Likes: 0
From: HAMMOND IN
Year: 2000
Model: Cherokee
Engine: 4.0
Renix Super Guru
Joined: Mar 2008
Posts: 24,653
Likes: 19
From: In yourz postez fissin jurr spelinzs
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
"JUNK"as meant as a term of endearment. I often refer to my Jeep as my "junk" but that doesn't mean I'm not very fond of it and have no plans to replace it. It is the fartherest thing from junk to me. I would rather have it than a brandnew anything. I know every bolt and nut on it and have had a wrench on each (transmission excepted) and thus was very surprised that you had not at least inspected everything the eye could see on yours.
Thread Starter
CF Veteran

Joined: Sep 2008
Posts: 5,025
Likes: 0
From: Palestine, TX
Year: 1988
Model: Cherokee
Engine: 4.0
"JUNK"as meant as a term of endearment. I often refer to my Jeep as my "junk" but that doesn't mean I'm not very fond of it and have no plans to replace it. It is the fartherest thing from junk to me. I would rather have it than a brandnew anything. I know every bolt and nut on it and have had a wrench on each (transmission excepted) and thus was very surprised that you had not at least inspected everything the eye could see on yours.

Renix Super Guru
Joined: Mar 2008
Posts: 24,653
Likes: 19
From: In yourz postez fissin jurr spelinzs
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
And yes men have junk that is occasionally appreciated by others. But that is another forum.



thanks