Torque specs
#2
CF Veteran
Join Date: Apr 2009
Location: Kalamazoo, MI
Posts: 1,601
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L with throttle body spacer and cold air intake, bored throttle body, #784 injector upgrade
85 ft lbs for the 4.oL if i remember right... or just google it.
#4
CF Veteran
Join Date: Oct 2009
Location: somewhere Gee oh Dee cant find me...
Posts: 4,529
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: I6 4.0L
from my factory service manual:...(pg.9-89 steps 5-7 of 1995 xj FMS)
Tighten the bolts of caps 1, 2, 4, 5, 6, and 7 to 54nm (40ft-lbs) torque. Now tighten these bolts to 95nm (70ft-lbs) torque. Finally, tighten these bolts to 108nm (80ft-lbs) torque.
push the crankshaft forward and backward. Load the crankshaft front or rear and tighten cap bolt #3 to 54nm (40ft-lbs), then 95nm (70ft-lbs), then 108nm (80ft-lbs)
rotate crankshaft after tightening each main bearing cap to ensure the crankshaft rotates freely
Tighten the bolts of caps 1, 2, 4, 5, 6, and 7 to 54nm (40ft-lbs) torque. Now tighten these bolts to 95nm (70ft-lbs) torque. Finally, tighten these bolts to 108nm (80ft-lbs) torque.
push the crankshaft forward and backward. Load the crankshaft front or rear and tighten cap bolt #3 to 54nm (40ft-lbs), then 95nm (70ft-lbs), then 108nm (80ft-lbs)
rotate crankshaft after tightening each main bearing cap to ensure the crankshaft rotates freely
Thread
Thread Starter
Forum
Replies
Last Post
Raney120
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
10-16-2015 11:27 AM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
10-02-2015 08:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)