Hey guys. If I lift 3", can I fit 31 x 10.50 x 15's without rubbing?

 

Yeah man should be able to fit that no problem at all.

 

Theyll fit just fine, but possibly rub when turned fully in one direction or the other. Just dont lock the steering.

 

The usual reported problem, if ever, is that the tire hits one of the lower control arms at full lock. Some people learn not to turn all the way. Some people adjust the stop. Others change the control arms. The other things I hear about with 31's is that some people think their stock gears are no longer that great and they upgrade to 4.10's and that the factor tie rod is no longer adequate so they upgrade that too. YMMV.

 

This is also dependent on your back spacing. Aftermarket vs. stock rims.

 

A lot depends if you off road and want full flex out of your XJ, if so they will rub and you'll have to do some trimming.

As far as wheels if you run a 15x8" with 3 3/4 to 4" of BS you will not rub the LCA's. When I ran 31's I did trimming to mine so it didn't rub, not a lot just a small amount and ditched the stock flares.