Throttle issues after valve gasket replacement.
#1
Seasoned Member
Thread Starter
Join Date: Nov 2009
Location: Boulder, CO
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Throttle issues after valve gasket replacement.
I just replaced my valve cover gasket this afternoon on my 1999 sport 4.0 and latter this evening when I went to drive my jeep I had to put the pedal to the floor (the pedal felt low and light) to get up to speed. Previous to the replacement the throttle was very responsive if I was not careful the rear end would kick out or squeal the tires. It is dark out so I thought I would get a jump on this problem now. Has anybody had this problem? What may be wrong? Thanks in advanced
#2
CF Veteran
Join Date: Aug 2011
Location: Blue Springs, MO
Posts: 1,031
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Grand Cherokee
Engine: 4.0L Laredo
I just replaced my valve cover gasket this afternoon on my 1999 sport 4.0 and latter this evening when I went to drive my jeep I had to put the pedal to the floor (the pedal felt low and light) to get up to speed. Previous to the replacement the throttle was very responsive if I was not careful the rear end would kick out or squeal the tires. It is dark out so I thought I would get a jump on this problem now. Has anybody had this problem? What may be wrong? Thanks in advanced
#3
Seasoned Member
Thread Starter
Join Date: Nov 2009
Location: Boulder, CO
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L I6
yep I double checked it in the daylight and found that where the throttle cable connects can be adjusted. I pushed the button and locked the adjustment and that fixed everything.
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
11-07-2015 01:22 AM
Jicki Rough
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 09:36 AM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 05:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)