Thread pitch of stock Sway Bar Link top stud?
07-08-2012, 01:48 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Tacoma
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Thread pitch of stock Sway Bar Link top stud?
Yesterday i put spacers in my xj and had to remove the top bolt of the sway bar links to drop the axle. Both nuts/top of studs twisted off. I am getting new factory links and want to try to make some homebrew extended links with them. Im wondering if anyone knows the thread pitch of them.
My plan is to find a threaded sleeve and thread that on to the stud, then put another stud on the top of the sleeve. Basically like these, where he has the female heim screwed on.
http://www.cardomain.com/ride/325707...-12#3257070215
My plan is to find a threaded sleeve and thread that on to the stud, then put another stud on the top of the sleeve. Basically like these, where he has the female heim screwed on.
http://www.cardomain.com/ride/325707...-12#3257070215
Thread
Thread Starter
Forum
Replies
Last Post
ammonllewis1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-31-2015 11:27 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)