Thoughts on unit bearings
CF Veteran
Joined: May 2012
Posts: 7,965
Likes: 964
From: Lost in the wilds of Virginia
Year: 1998 Classic (I'll get it running soon....) and 02 Grand
Model: Cherokee (XJ)
Engine: 4.0
I just did mine with NAPA a few weeks ago. Turns out one of them didn't get the holes tapped completely through. They were drilled all the way through, but the tap didn't make it all the way. Might want to check for that. I ran a tap through and they bolted up fine.
Otherwise, they are fine so far.