temp sensor help
#1
Member
Thread Starter
Join Date: Sep 2009
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
temp sensor help
so i replaced the temp sensor because it wasn't display anything but now when i turn the jeep on its stay at about 160 could a wire short be causing this? or any input on this
#2
CF Veteran
Join Date: Jul 2008
Location: Schnecksville, PA
Posts: 1,217
Likes: 0
Received 5 Likes
on
5 Posts
Year: 94 XJ
Model: Cherokee
Engine: 4.0L
Which did you change?
There are 2.
Coolant Temperature SENDER
AND
Coolant Temperature SENSOR
SENSOR is right up front on thermostat housing. Has 2 wires in a weathertight connector. Works with ECU/PCM (computer)
SENDER is located near back of the head alongside the valve cover. Only has one wire and depending on the year, that wire only slips on or is in a weathertight connector. Works with temperature gauge.
The most common mistake is to change the wrong one.
If you changed the right one, just ignore me.
There are 2.
Coolant Temperature SENDER
AND
Coolant Temperature SENSOR
SENSOR is right up front on thermostat housing. Has 2 wires in a weathertight connector. Works with ECU/PCM (computer)
SENDER is located near back of the head alongside the valve cover. Only has one wire and depending on the year, that wire only slips on or is in a weathertight connector. Works with temperature gauge.
The most common mistake is to change the wrong one.
If you changed the right one, just ignore me.
Thread
Thread Starter
Forum
Replies
Last Post
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-09-2015 10:29 PM
csspencer
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-15-2015 07:30 AM
Team SAW
Modified XJ Cherokee Tech
1
09-11-2015 08:26 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)