temp gauge (help)
#1
Newbie
Thread Starter
Join Date: Jan 2011
Location: pulaski,tennessee
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
temp gauge (help)
i am trying to install a aftermarket temp gauge on my 94 cherokee sport.
i has a idiot light on dash. where can i screw the probe into?
i has a idiot light on dash. where can i screw the probe into?
#2
CF Veteran
I think yours only has one sending unit on it. Outside of drilling and tapping a new hole near the tstat housing, you might be out of luck. Why don't you get another gauge cluster and sending unit and use the stock stuff.
#3
Honorary Moderator
Join Date: Mar 2010
Location: Gilbert AZ/Las Cruces NM
Posts: 8,135
Likes: 0
Received 13 Likes
on
11 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
on the back of the engine block there is a fitting for the cluster light, unscrew it and replace with your aftermarket one.
it will be at the back of the valve cover on the drivers side.
I had the same idiot light and that is what I did as well.
4.3 xj all xj's have the fitting at the front (PCM Control) and the rear (Cluster light/gauge)
it will be at the back of the valve cover on the drivers side.
I had the same idiot light and that is what I did as well.
4.3 xj all xj's have the fitting at the front (PCM Control) and the rear (Cluster light/gauge)
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
scatgo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
03-22-2021 09:56 AM
Joshuapn
Other Vehicles. Other Jeep models & cars and trucks of other makes
1
09-25-2015 08:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)