1991 4x4 base Cherokee 4.0. My tail light fuse keeps blowing when I turn the ignition to the start position. If the car is running and I replace the fuse the lights stay on. Any ideas?
I could not find one. Would that relate to the ignition?
CF Veteran
when you start the truck are you applying the brakes try start with out applying the pedal if it dont blow check brake light switch and tail liights for pinched or shorted housing wires ect
Junior Member
My work van had the same prob and the mechanic shop we bring it to said it had a bad ground at the rear of the van.
x2 on a bad ground at the taillights
Quote:
Brake lights still work. Everything works up until the starter is engaged then that tailight fuse blows...Ive rewired the tail light boxes twice...just to make sure...Imm ready to do it three times...Originally Posted by freegdr
when you start the truck are you applying the brakes try start with out applying the pedal if it dont blow check brake light switch and tail liights for pinched or shorted housing wires ect