swapping parts from my 96 to 95. need help with instrument cluster.
Thread Starter
Seasoned Member
Joined: Nov 2009
Posts: 495
Likes: 0
From: PA
Year: 1996
Model: Cherokee
Engine: 4.0 HO
my 95 is a 5speed, with idiot lights and no tach. my 96 has a tach and gauges. I swapped them and the tach, speedometer and amp gauge worked. oil pressure and temp didnt. any suggestions?
the oil pressure gauge jumped to the max. So I put the old one back in. I have to have a tach and temp gauge. The reason I even tried the swap was that the check engine light came on today. I flushed the coolant as it looked like crap. it didnt come on again.???? Im thinking I should change the water pump for good measure. The 95 has an ODB I my 96 is ODBII. Its just wierd that the 95 doesnt have a tach and when I hooked up the 96 cluster the tach worked.
the oil pressure gauge jumped to the max. So I put the old one back in. I have to have a tach and temp gauge. The reason I even tried the swap was that the check engine light came on today. I flushed the coolant as it looked like crap. it didnt come on again.???? Im thinking I should change the water pump for good measure. The 95 has an ODB I my 96 is ODBII. Its just wierd that the 95 doesnt have a tach and when I hooked up the 96 cluster the tach worked.
Thread
Thread Starter
Forum
Replies
Last Post
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Aug 26, 2020 12:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



