Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

stripped wheel stud!!

Thread Tools
 
Search this Thread
 
Old Apr 22, 2009 | 04:35 PM
  #1  
tjfritz325's Avatar
Thread Starter
Member
 
Joined: Apr 2009
Posts: 148
Likes: 0
From: Iowa
Year: 2001
Model: Cherokee
Engine: 4.0
Default stripped wheel stud!!

Ok so after messing around wiht the lug nuts which I thought were stripped I found that the stud is also spinning. So do you guys have any ideas for removing it??

Thanks a bunch!
Reply
Old Apr 22, 2009 | 04:40 PM
  #2  
ol"blue's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 28,068
Likes: 6
From: Tenn. and Mich.
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Default

Didn't you say it was the dealers fault? Leave it alone before you fudge up the wheel. Make the dealer repair it. If they damage the wheel, they're responsible, and should replace it.
Reply
Old Apr 22, 2009 | 05:04 PM
  #3  
XJ Stryker's Avatar
CF Veteran
 
Joined: Apr 2008
Posts: 7,661
Likes: 15
From: Smiths Station, Al
Year: 87
Model: Wagoneer
Engine: 4.0 I6
Default

If they tell you they won't then you will have to Cut the stud off or try and cut the lug nut off. Can be very difficult cause you will more than likely did into the rim. I recommend a Dremel here.
Reply
Old Apr 22, 2009 | 05:07 PM
  #4  
parkerbabco's Avatar
Senior Member
 
Joined: Dec 2008
Posts: 831
Likes: 1
From: Punxsutawney Pennsylvania
Year: 1988
Model: Cherokee
Engine: Renix 4.0 I6
Default

just hit it with a hammer if the lug nut is off of it.. if its not off cut it off with a die grinder and then take everything off and then hit it with a hammer
Reply
Old Apr 22, 2009 | 05:13 PM
  #5  
tjfritz325's Avatar
Thread Starter
Member
 
Joined: Apr 2009
Posts: 148
Likes: 0
From: Iowa
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Ya, it is the dealers fault and Im taking it to him tomorrow but I thought I might as well try. I am being VERY carefully and the wheel is fully protected. Right now im trying to split the nut off
Reply
Old Apr 24, 2009 | 09:35 AM
  #6  
tjfritz325's Avatar
Thread Starter
Member
 
Joined: Apr 2009
Posts: 148
Likes: 0
From: Iowa
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Well the dealer got them off. All he used was an impact and was done in about 20 min.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
Jan 31, 2024 04:58 PM
eagle11401
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Oct 8, 2015 04:36 PM
NVRicochet3006
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Sep 24, 2015 09:43 PM
kado
Cherokee Chat
14
Sep 17, 2015 12:22 AM
ARCH4NGEL_II
Modified XJ Cherokee Tech
0
Sep 7, 2015 12:18 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 04:32 PM.