Can anyone tell me what the distance from the floor pan underneath to the center of the shackle bolt is?

I rebuilt my rear frame and mounted my rear shackles even with the bottom of the frame vice the original position using CJ spring hangers.

I figure the floor will be the only constant so that I can figure out how much I actually lifted it. Thank you

 

About 2 3/4” is what I got.
bone stock.

 

Thank you sir. That puts me at roughly 4” with no gas tank and the floor pan missing.

 

Those bolts in your shackles do not appear to stick out past the nut. Unless they are not tight in your first picture. If so you need longer bolts. Should have a minimum of 2 threads past the top of nut, i would go 3 or 4. Also those back tires are shot

 

You are right on both counts. Thanks for looking out. My build thread is over in the build section. Thanks again

https://www.cherokeeforum.com/f46/50...nd-sxs-262795/