steering gear box
#1
Senior Member
Thread Starter
Join Date: Sep 2014
Location: Saginaw Mi area
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
steering gear box
My '94 Jeep has quite a bit of play in the steering. I'm thinking of removing the power steering gear and adjusting it per the Factory Service Manual. It looks to be reasonably simple once the gear box is out of the vehicle.
Anyone here ever done this ? An exchange/rebuilt box is only about 140 bucks........
Bill
Anyone here ever done this ? An exchange/rebuilt box is only about 140 bucks........
Bill
#5
CF Veteran
Join Date: Apr 2012
Location: Wisconsin
Posts: 5,302
Likes: 0
Received 19 Likes
on
16 Posts
Model: Cherokee
I've done several of these in their GM incarnation. (It's a Saginaw box)
There are two adjustments, the sector shaft preload (on top) and the input shaft bearing. You have to pull the box to do it right, which the FSM will explain. Might help, might not, depending on what's worn.
Watch the "rebuilds", often they aren't any better than what you have.
There are two adjustments, the sector shaft preload (on top) and the input shaft bearing. You have to pull the box to do it right, which the FSM will explain. Might help, might not, depending on what's worn.
Watch the "rebuilds", often they aren't any better than what you have.
Thread
Thread Starter
Forum
Replies
Last Post
aroundincircles
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 11:12 AM
Docruiz
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
09-02-2015 07:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)