Steering Column Removal
#1
Junior Member
Thread Starter
Steering Column Removal
Still working on my new heater core project. I'm stalled trying to get the steering column out. I removed the wheel and the two column mounting nuts but I can't get the column coupler bolt out. Here's a photo of the bolt. It has a round head on the left (outside) and a 10mm nut on the right (inside). I took the nut off but that bolt will not budge. I can get it to turn slightly by putting vice grips on the round head but it seems like it is almost pressed into the aluminum column. Any tricks to getting this thing out? Thanks.
jor
jor
Thread
Thread Starter
Forum
Replies
Last Post
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
03-08-2016 11:33 AM
aroundincircles
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 11:12 AM
ARCH4NGEL_II
Modified XJ Cherokee Tech
0
09-07-2015 12:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)