starter motor removal
Thread Starter
Newbie
Joined: May 2010
Posts: 2
Likes: 0
From: kent
Year: 1997
Model: Cherokee
Engine: deisel
starter motor removal
Hi guys I am a newby to the forum and would really appreciate some help.
I tried to remove the starter motor from my cherokee 1997 2.5 TD.
Removed bolts and bracket from the rear of the motor and the 2 upper and lower bolts which go into the bell housing.
Tried to pull the motor out but is solid as a rock, have I missed any bolts?
Please help!!
I tried to remove the starter motor from my cherokee 1997 2.5 TD.
Removed bolts and bracket from the rear of the motor and the 2 upper and lower bolts which go into the bell housing.
Tried to pull the motor out but is solid as a rock, have I missed any bolts?
Please help!!
Member
Joined: Apr 2010
Posts: 153
Likes: 0
From: Greenville, SC
Year: 1996 two-door SE
Model: Cherokee
Engine: 4.0
I've never had to replace my starter (1996 with 226,000+ miles
), but assuming that all of the bolts and attachments have been removed, take a rubber mallet to it and be ready to catch it.
), but assuming that all of the bolts and attachments have been removed, take a rubber mallet to it and be ready to catch it.
CF Veteran
Joined: Aug 2008
Posts: 5,603
Likes: 0
From: Hollidaysburg, PA
Year: 1990
Model: Cherokee
Engine: 4.0 lt. 242 cu.in.
Not sure about the TD's but the 4.0s only have 2 bolts. Look all around the starter to see if there's another bolt somewhere. If there isn't try grabbing the starter and yanking on it with your body weight. Just BE careful when it pops out. It sucks when they fall on you....
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
DrShaggford
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Sep 3, 2015 01:30 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)