thanks , will try it . where can i buy a SYE ?
Member
Well....it depends on A) What transfercase you have (NP231 or NP242), and B) How much money you want to spend.
SYE's can be had for $150ish for the SYE and a driveshaft (The Rubicon Express Hack & Tap method), or a few hundred dollars more for a SYE that replaces the entire output shaft, with a new driveshaft as well.
If you have the 231, you have several options. If you have the 242, your options are really limited to about 2.
SYE's can be had for $150ish for the SYE and a driveshaft (The Rubicon Express Hack & Tap method), or a few hundred dollars more for a SYE that replaces the entire output shaft, with a new driveshaft as well.
If you have the 231, you have several options. If you have the 242, your options are really limited to about 2.
thanks to all that replied . seems i have solved the "shudder" problem . i dropped the TC . but , the squeak is still there . think i will replace oil pump , cause have noticed the oil pressure is down , once the engine heats up . lets hope this solves it ????????
Renix Super Guru
Quote:
Said he pulled the belt and still had the squeak.Originally Posted by UKSkidMark
No-one's mentioned worn pulley bearings...
Renix Super Guru
Quote:
Try these guys. Mine came from them. HERE Originally Posted by captainviv
thanks , will try it . where can i buy a SYE ?
CF Veteran
Quote:
Originally Posted by captainviv
thanks to all that replied . seems i have solved the "shudder" problem . i dropped the TC . but , the squeak is still there . think i will replace oil pump , cause have noticed the oil pressure is down , once the engine heats up . lets hope this solves it ????????
What is your Oil pressure at?
well , seems i have solved the squeak problem . changed the oil . reversed vehicle up steep bank . put in park , revved engine a couple of times . noise has gone . 
only thing i can think of is oil did not get to the front top of engine ( cause of engine angle downward) but , still dont know what was squeaking . anyway , has gone for now . lets hope it stays that way . hope this can help someone in future with same problem

only thing i can think of is oil did not get to the front top of engine ( cause of engine angle downward) but , still dont know what was squeaking . anyway , has gone for now . lets hope it stays that way . hope this can help someone in future with same problem