I scored some Rubicon coil springs off my Buddy for free. They were on his xj , but he doesn't know how much lift they were. So does anyone know?
I measured them at 22.5" long.

 

they look like maybe 3.5 or 4.5. look for a part number on the spring and look it up.

 

just mesured my 3" rustys springs 18"or20" so i would gues 4"


hey cant beet free though

 

Probably RE 3.5 springs but there should be a part number etched into them that will allow ya to look em up on RE's site. But as far as I know RE's XJ springs are grey/silver not black..

 

3.5 or 4.5 re

 

they are grey i didn't see a # on them i will look, they just look big

 

i think your right 4 to 4.5 i looked for a # but i dint see a dam thing anywhere. where on the spring is it.


FREE IS GOOD

 

im think RE only makes stuff by the .5 in. like 3.5, 4.5, 5.5, etc.

 

The RE 3.5" coils measure to what most other 4.5" coils do.. So there most likely 3.5" RE's than, based on the info given...

 

Times 2 except the newer RE coils have got a paper tag and are no longer etched IIRC. The measurements you gave match the 3.5" RE coils.

 

given the color, and length, they look identical to the pro-comp springs I'm running. if so, they dont list for an XJ, but are TJ 5.5" fronts...they're a 175lbs/inch spring rate, and give about 4.5" on an otherwise stock XJ.