when i start my jeep it take a a little while to finally start. i've replaced starter a yr ago and i've have alternator and starter coil replaced this year. it had a error at one time this year for injector #1 misfire had it replaced too and it has not came back as a misfire anymore. I've replaced the fuel pump and fuel filters in the gas tank also. and no luck on getting this fixed tired of fixing stuff. would like some help on maybe what it could be rather then taking it somewhere.

 

Slow to crank? Cranks OK but slow to fire?

 

sounds like the starter is trying to start it but just takes a long time for the engine to catch

 

Try this:
Turn key to ON. Wait 5 seconds.
Turn key OFF.
Repeat twice more.
Try starting.

That primes your fuel rail by running the fuel pump a couple of times. If that helps, your check valve is going bad or you have a leaky injector.

 

ok i'll check that out tomorrow when i head to work and see if it helps. and where would the check valve be located? and on injector how do you tell if one is leaking or not? i'll let ya know how it turns out tomorrow. and thanks for you input.

 

ok so i tried this and this morning it helped but still took a little bit but not as long like it has been but after work not so much help.