Shocks and Brakes
11-15-2009, 02:20 PM
#1
Newbie
Thread Starter
Join Date: Feb 2008
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Shocks and Brakes
ok, I purchased new shocks for the rear and a new reman. master cyl. I could not figure out what size sockets/wrenches I need for them, and for the bleeder 'screws' in the rear and front.... ( also if anyone knows what size socket I need for the rear differential drain plug....
Any assistance would be appreciated, ty.
88 Cherokee Laredo......
Any assistance would be appreciated, ty.
88 Cherokee Laredo......
11-15-2009, 05:28 PM
#3
CF Veteran
Join Date: May 2008
Posts: 2,914
Likes: 0
Received 5 Likes
on
4 Posts
Year: 1987
Model: Comanche
Engine: I6 4.0L
The rear diff does not have a drain plug you just pry the cover off and the fluid will ruch out. And pick up a Hynes repair manual It will all be in there.
11-15-2009, 08:26 PM
#5
Junior Member
Join Date: Jul 2009
Location: Glen Burnie, MD
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1986
Model: Cherokee
Engine: 2.8
off the top of my head... shocks are 3/4" bottom rear bolts and 13mm upper rear bolts. fronts might be 13mm bottom and 9/16" upper? as for the brake stuff, get line wrenches from 3/8" to 9/16" and you'll be covered.
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-05-2015 07:56 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)