Shimming coupler over with washers on Dana 30
#1
Junior Member
Thread Starter
Join Date: Mar 2009
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1988
Model: Cherokee
Engine: 2.5
Shimming coupler over with washers on Dana 30
Ok, I have searched and no one seems to be able to clarify this, Do you need to take the axle out to shim it over with washers? Does anyone have any real pics of this mod?
#2
CF Veteran
yeah, you need to slide the outer axle out enough to get the washers on the intermediate shaft.
i have just used a gear/hose clamp to hold the collar in the locked position. worked just fine, and didn't need to remove the outer shaft to do it either.
i have no pics, but it's simple, just remove the actuator and slide the collar over to lock the shafts and put the gear clamp around the axle shaft against the collar and tighten it down, then carefully reinstall the actuator with the fork in line to slip over the collar. done.
i have just used a gear/hose clamp to hold the collar in the locked position. worked just fine, and didn't need to remove the outer shaft to do it either.
i have no pics, but it's simple, just remove the actuator and slide the collar over to lock the shafts and put the gear clamp around the axle shaft against the collar and tighten it down, then carefully reinstall the actuator with the fork in line to slip over the collar. done.
Thread
Thread Starter
Forum
Replies
Last Post
extrashaky
Other Vehicles. Other Jeep models & cars and trucks of other makes
17
06-17-2023 03:57 PM
toasterknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
33
05-21-2016 07:03 AM
Lightning_19k
Modified XJ Cherokee Tech
14
10-03-2015 09:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)