Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

shaking when starting to move

Thread Tools
 
Search this Thread
 
Old Jul 10, 2009 | 10:16 PM
  #1  
stlsean's Avatar
Thread Starter
Newbie
 
Joined: Dec 2008
Posts: 26
Likes: 0
Model: Cherokee
Default shaking when starting to move

Hello all,

A little help needed. When I go to take off, especially in reverse or 2nd gear, my jeep is shaking really bad like the drive shaft is out of balance or something. But new u-joints on it last year but put over 100 miles a day on it.

Anyone have any suggestions if is the u-joints or something to do with the rear end? Any help or comments appreciated.

Thanks.
Reply
Old Jul 10, 2009 | 10:55 PM
  #2  
Mike1998XJ's Avatar
Senior Member
 
Joined: Apr 2009
Posts: 922
Likes: 2
From: Grand Haven, Michigan
Year: 1998, 1999
Model: Cherokee
Engine: 4.0
Default

Is it a 5 speed manual tranny? More details might help.
Reply
Old Jul 11, 2009 | 12:21 AM
  #3  
stlsean's Avatar
Thread Starter
Newbie
 
Joined: Dec 2008
Posts: 26
Likes: 0
Model: Cherokee
Default

5 speed is correct.
Reply
Old Jul 11, 2009 | 12:24 AM
  #4  
93XJRay's Avatar
Senior Member
 
Joined: Mar 2009
Posts: 658
Likes: 0
Year: 1993
Model: Cherokee
Engine: 4.0 H/O I6
Default

what kind of shaking? is there a specific place it is coming from? try to describe it a bit more for me if you could.. thanks. im not trying to be a jerk at all im just seeing if i can help
Reply
Old Jul 11, 2009 | 12:27 AM
  #5  
ol"blue's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 28,068
Likes: 6
From: Tenn. and Mich.
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Default

Not the drive shaft. Shaking would increase with speed. Check the trans mount. JMO
Reply
Old Jul 11, 2009 | 12:37 AM
  #6  
stlsean's Avatar
Thread Starter
Newbie
 
Joined: Dec 2008
Posts: 26
Likes: 0
Model: Cherokee
Default

Sorry about the lack of info. Here is a little bit more...

Best way to describe the shaking is similar to trying to take off in fourth gear.

Seems to be coming from the mid to rear of the jeep.

Has just recently started doing it- about a month or so ago and is getting worse.

I used to be able to take off from second (especially if not at a complete stop) but not now due to the shaking- reverse and first gear doing it now, but not as extreme but is slowly getting worse.
Reply
Old Jul 11, 2009 | 12:54 AM
  #7  
Hylander's Avatar
Member
 
Joined: Jul 2009
Posts: 187
Likes: 0
Model: Wagoneer
Default

Sounds like Trans Mount or loose rear U-Bolts
Reply
Old Jul 11, 2009 | 12:58 AM
  #8  
Mike1998XJ's Avatar
Senior Member
 
Joined: Apr 2009
Posts: 922
Likes: 2
From: Grand Haven, Michigan
Year: 1998, 1999
Model: Cherokee
Engine: 4.0
Default

Sounds like the clutch to me... How many miles on the clutch, pressure plate and throwout bearing?
Reply
Old Jul 11, 2009 | 01:02 AM
  #9  
stlsean's Avatar
Thread Starter
Newbie
 
Joined: Dec 2008
Posts: 26
Likes: 0
Model: Cherokee
Default

Clutch components all replaced about 2 years ago. Clutch not slipping at all but that may not mean much.
Reply
Old Jul 11, 2009 | 01:06 AM
  #10  
93XJRay's Avatar
Senior Member
 
Joined: Mar 2009
Posts: 658
Likes: 0
Year: 1993
Model: Cherokee
Engine: 4.0 H/O I6
Default

im going to agree on the mounts and bolts, the clutch would be noticabley acting up over some time before it would crap out, not in every case, but mostly. i would check tranny mount and rear u bolts if i were in your position. especially since you said from mid to rear of the jeep.
Reply
Old Jul 11, 2009 | 01:09 AM
  #11  
Mike1998XJ's Avatar
Senior Member
 
Joined: Apr 2009
Posts: 922
Likes: 2
From: Grand Haven, Michigan
Year: 1998, 1999
Model: Cherokee
Engine: 4.0
Default

I'd take the inspection plate off and take a look at the clutch to rule it out. I had a 1976 toyota Landcruiser that I got stock, brutalized the clutch to get out and it shuddered after that until I replaced it. When I removed the inspection cover I found pieces broke off the clutch floating around in there... I think I also spilled my beer while doing this... Offroad on private property of course.
Mike
Reply
Old Jul 11, 2009 | 01:17 AM
  #12  
stlsean's Avatar
Thread Starter
Newbie
 
Joined: Dec 2008
Posts: 26
Likes: 0
Model: Cherokee
Default

I'm planning on crawling under it tomorrow and I will post what I find out.

To everyone who replied, thank you very much.
Reply
Old Jul 11, 2009 | 01:49 AM
  #13  
93XJRay's Avatar
Senior Member
 
Joined: Mar 2009
Posts: 658
Likes: 0
Year: 1993
Model: Cherokee
Engine: 4.0 H/O I6
Default

good luck, keep us updated and well see what we can do.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
95cherokee89
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
59
Oct 16, 2015 03:17 AM
nts07
Cherokee Chat
1
Aug 27, 2015 08:59 AM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
40
Aug 26, 2015 12:08 AM
14lgreer
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
Aug 21, 2015 01:46 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 06:26 AM.