rusty's 4.5" lift
Thread Starter
Junior Member
Joined: Apr 2009
Posts: 65
Likes: 0
From: Albany,NY
Year: 2000
Model: Cherokee
Engine: 4.0 I6
hey guys i was considering getting the rusty's 4.5" lift and wanted some opinions as to if you guys liked your rusty lift and if u guys could post some pics and comments id really appreciate it thx
and its the spring pack lift not the AAL
and its the spring pack lift not the AAL
Member
Joined: Mar 2009
Posts: 170
Likes: 0
From: Oakland Maine
Year: 1999
Model: Cherokee
Engine: 4.0L
holy wow i wish i had seen it instead of my rc 3in ive spent about that much and thats without lower control arms, adjustable trac bar, sway bar drop, or extended brake lines. Definatly go for it imo if your gonna do a t-case drop call em up to see if you can get the t-case drop crossmember. After looking at that kit im quite mad that i just jumped in and bought the rc kit. good luck to you.
CF Veteran
Joined: Nov 2008
Posts: 6,989
Likes: 4
From: Oak Harbor, WA.
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
I started out with the Rusty's 4.5 inch lift on my Jeep. I've had in on for 4 years now and I like. At first I thought the coils were too soft and the leafs were too stiff but, it has all settled and now it is great. My only gripe with Rusty's is that their shipping charges are horrible.
yeah i bought one from a guy used and im still at 4.5 inches, its a very good ride and dont sag much at all over time, go look at my pics under the 4.5 lift with 33's album or doorless they both have pics of the 4.5 lift
CF Veteran
Joined: Jul 2009
Posts: 1,640
Likes: 0
From: Keesler AFB, MS
Year: 1998 XJ
Model: Cherokee
Engine: 4.0L
i just installed my 4.5 inch spring pack yesterday. i have not got the front end aligned yet so i can't really vouch for anything but the way it looks. i think it looks freaking awesome. i bought the whole kit, lift tires and rims for 1470.00. but the shipping was right at 250 to 270. one or the two. it was a lot but i did recieve everything in about 2 business days. i ran into some problems. trying to removed the studs on the tc crossmember and could not figure out how the rear brake line extender mounted. i will call them tomorrow and hopefully they can tell me. as of right now i would say deffinetly go for it.
i will post pics when i get everything done so you can see
i will post pics when i get everything done so you can see
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



