Rugged Ridge steering componets
#1
Junior Member
Thread Starter
Join Date: Feb 2010
Location: Jacksonville, TX
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Rugged Ridge steering componets
The Drag link is bent on my '99 Jeep Cherokee and I was wondering whats your opinions on the Rugged Ridge kits?
#2
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
I have many bad things about them since Omix bought them.
For me I would get this.
http://shoplive.rompalicious.com/cro...tj-p-1946.html
For me I would get this.
http://shoplive.rompalicious.com/cro...tj-p-1946.html
#4
CF Veteran
Join Date: Feb 2010
Location: Soddy Daisy TN
Posts: 5,420
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0L
I ran one for about 2 years and the only issue I had was that I had a bit of play in mine but turned the tie rod ends on the tie rod opposite each other and it took out the play. Mine was the crossover type. You will NOT bend it. I weighs about 40lbs. If you have more than 6" of lift you might have an issue. I couldn't find a tie rod end for the pass side that could be used over the knuckle.
#5
CF Veteran
Join Date: Jan 2009
Location: Aurora
Posts: 3,513
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997 XJ
Model: Cherokee
Engine: 4.0 HO JASPER MOTOR
I ran one for about 2 years and the only issue I had was that I had a bit of play in mine but turned the tie rod ends on the tie rod opposite each other and it took out the play. Mine was the crossover type. You will NOT bend it. I weighs about 40lbs. If you have more than 6" of lift you might have an issue. I couldn't find a tie rod end for the pass side that could be used over the knuckle.
#6
Seasoned Member
Join Date: Apr 2009
Location: Northeast PA
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0, k&n intake Flomaster cat back
hahaha yea stump jumpedout of some tall grass and decided to bend my drag linkon my ruggid ridge kit, crushed the stabilized too. but ive been running it for a couple of months with no problems, other than the deathwobble from the bad stabilizer
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
The Aristocrat
Wanted
2
02-25-2017 01:17 AM
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
kend3031
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-30-2015 08:15 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)