RPM problem
Thread Starter
Newbie
Joined: Jul 2009
Posts: 17
Likes: 0
Year: 1989
Model: Cherokee
Engine: 4.0lt
RPM problem
We just put on a PaceSetter header on my 89 Jeep Cherokee.
Everything seems to be running perfectly normal minus the RPM issue.
It shifts fine when going a normal pace but if you gun it or make it down shift, it will not let you go past 2500RPM.
It almost acts as if its hitting a govener and then will take about 10seconds to shift after throwing its fit.
The idle after perfect temperature is around 500RPM but Im still not sure if that IS the problem.
ANY SUGGESTIONS WHAT SO EVER ARE MORE HELPFUL THEN NOTHING
I am at a total loss
Everything seems to be running perfectly normal minus the RPM issue.
It shifts fine when going a normal pace but if you gun it or make it down shift, it will not let you go past 2500RPM.
It almost acts as if its hitting a govener and then will take about 10seconds to shift after throwing its fit.
The idle after perfect temperature is around 500RPM but Im still not sure if that IS the problem.
ANY SUGGESTIONS WHAT SO EVER ARE MORE HELPFUL THEN NOTHING
I am at a total loss
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
Jan 10, 2024 06:17 AM
jurazov
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
Jul 20, 2023 04:13 AM
Jamesmon4
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
Aug 16, 2016 09:04 PM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Oct 9, 2015 10:29 PM
Jicki Rough
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 2, 2015 09:36 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
