Roll pin replacement question mid 80's Dana 35
#1
Seasoned Member
Thread Starter
Join Date: Jul 2011
Location: Sierra Vista AZ
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
Roll pin replacement question mid 80's Dana 35
I've got some maintenance to do on my Dana 35 which requires removal of the roll pin that holds the cross shaft in the carrier. I've read to NEVER reuse the old one. Is there a specific part number for this roll pin or can i just go to the hardware store for one?
#2
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
What maintenance requires that also older dana 35s have a 5/16 head bolt.
Last edited by freegdr; 11-13-2012 at 05:40 PM.
#3
Seasoned Member
Thread Starter
Join Date: Jul 2011
Location: Sierra Vista AZ
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
The "maintenance" i guess could be considered an upgrade...I'm taking a locker i pulled out of my 1990 3.55 geared c clip Dana 35 and installing it into this 4.11 geared 1986 non c clip Dana 35.This rearend doesn't have the bolt...The 1990 rearend did have the bolt.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rotorhead
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
09-23-2023 04:17 PM
investinwaffles
Modified XJ Cherokee Tech
11
05-18-2021 12:02 PM
hpwrestler220
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
03-03-2017 01:13 AM
Batman33165
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
08-27-2015 02:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)