rocker panels replacement
#1
Newbie
Thread Starter
Join Date: Oct 2010
Location: New Brunswick, Canada
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
rocker panels replacement
Hi,
I have a ( 4 door) 2000 jeep cherokee classic and looking for some how to's to replace my rocker panels...
I ordered some replacement rocker panels ( left & right side)
how hard is it to remove the factory ones? and put new ones....
any advice?
Thank You
Mickey
I have a ( 4 door) 2000 jeep cherokee classic and looking for some how to's to replace my rocker panels...
I ordered some replacement rocker panels ( left & right side)
how hard is it to remove the factory ones? and put new ones....
any advice?
Thank You
Mickey
#2
Senior Member
Join Date: Jan 2011
Location: Dalton, MA
Posts: 645
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 H.O. 180K miles
Theres are guides online, basically you have to drill out the spot welds to get the old one out. If they are really shot, (like mine are) the pinch weld is rusted off and you will have to cut away all thats left of the rocker and weld something to the unibody to connect to the rocker panel. It can be a PITA haha
Thread
Thread Starter
Forum
Replies
Last Post
Zeke P. Lucas
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-30-2015 05:42 PM
EBowen95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
49
08-25-2015 08:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)