Rocker Panel Options
#1
Member
Thread Starter
Join Date: Sep 2010
Location: Northern MI
Posts: 103
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Rocker Panel Options
My rocker panels are rusted out BAD! How would I go about taking these off and making new ones? Doesn't have to look pretty or be real beefy, I'm not much of a rock crawler, just want to stop having rust flakes fall off every time something touches my rig.
#2
CF Veteran
Join Date: Jul 2010
Location: 802
Posts: 4,930
Likes: 0
Received 3 Likes
on
3 Posts
Year: 99
Model: Cherokee
Engine: 4.0
check some build threads. ill bet there is someone who has some pics up. basically, get new sheet metal in where needed, and then bolt up sliders to the new... nice and vague, huh...?
#3
CF Veteran
Join Date: Sep 2009
Location: Knoxville, TN
Posts: 1,471
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 inline 6 (o yea!)
Best bet would be weld in rockers. Functional and good looks. All you need is a piece of 2x6x3/16 steel and an afternoon. Thats what I did when mine started to rust and then I got t-boned.
#4
CF Veteran
yeah, i would go with the 2x6 and weld those in place. but first you have to cut out the rusted rocker but leave just the top lip to sorta wrap around the top of the 2x6 when you weld it in. cap the ends and it'll look nice.
or you can buy replacement panels for 50 bux each. you can buy just one and cut it in half and replace the rear section if that's all that's rotting out. here in canada there's a place called cross-canada auto parts, not sure where you get them in the U.S. tho.
or you can buy replacement panels for 50 bux each. you can buy just one and cut it in half and replace the rear section if that's all that's rotting out. here in canada there's a place called cross-canada auto parts, not sure where you get them in the U.S. tho.
#5
Senior Member
Join Date: Jan 2011
Location: Dalton, MA
Posts: 645
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 H.O. 180K miles
I have a 98 too and my rockers are also rusted out, I was just planning on welding in some 2x6" steal beam or something as a rocker/slider all in one deal.
#6
Member
Join Date: Oct 2009
Location: Ironton Ohio
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Rockauto has them for 20 each four door, and 17 each 2 door, just look under a 1994 model. All Cherokee rockers are the same. Make sure you order the correct ones 2d or 4d.
Thread
Thread Starter
Forum
Replies
Last Post
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
12-11-2015 11:09 AM
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
10-04-2015 06:34 AM
Stabsthedrama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
10-03-2015 05:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)