Grand Theft Joe

Hi everybody,
I'm new at this forum and I would like to ask a few questions regarding mi rig's wheels and tires.


I bought an 89 Wago XJ, it was already lifted and was riding on 35x12.5 procomps, I know is a way too big tire for the gears so I will now put 32x11.5 for the axle ratio is 3.73, the thing is that once that one wheel cracked the holes and I almost roll over on the road, so I want to put another set of wheels.

I was wondering if the stock 86 wheels are good enough to fit the 32"s without harming the tire on the sway bar brackets...

any answer for this will be appreciated

thanks all

TrekkerJmm

First..., Hi and welcome to CF from Tj in NJ. The factory rims are only 7 inches wide and the tire will be crushed between them IMO. Try to get at least 8-9 wide for 12.5's...Tj

Grand Theft Joe

Gee thanks bro, I just sent back those and got the set of 15x8 rims, still not placed but ready to...


Thanks a lot again