on a 2001 the brake lines to abs pump are in the way to remove control module so i have to remove the brake lines. After hooking all back up can i just bleed the lines normally at each tire since I left brake fluid in abs pump (didnt replace it) or do I have to do something else. Dont want to get stranded in my driveway with no brakes

I believe there is a special process to bleed ABS modules

Dont know if there are any easy work arounds, others will

my DD 96 does not have, my spare 96 does. Would love to swap

Therefore procedure should be outlined in the FSM for '96, here is a link

https://www.cherokeeforum.com/f2/fsm...ds-awg-274313/