Is this a Renix Knock sensor

Reply Subscribe

Thread Tools

Search this Thread

Jul 11, 2019 | 12:07 AM

#16

cruiser54

::CF Moderator::

Joined: Aug 2011

Posts: 43,971

Likes: 1,579

From: Prescott, Az

Year: 1990

Model: Cherokee (XJ)

Engine: 4.0

Quote:

Originally Posted by EuroJeep

So reading the multimeter, the sensor is ok ?

I’ll replace next week the very noisy fuel pump and the fuel filter.
I did not replace the full distributor because it starts well (3 seconds) and runs well on the road.

Where are the meter leads connected and what are you trying to determine?

Jul 11, 2019 | 02:22 AM

#17

EuroJeep

Thread Starter

Member

Joined: Apr 2019

Posts: 236

Likes: 8

From: France

Year: 1987

Model: Cherokee (XJ)

Engine: 4.0

I was doing that part of the Tip :

3. Touch the black lead of your meter to the negative battery post. Wiggle the wiring harness where it parallels the valve cover and also over near the MAP sensor on the firewall. If you see more than 1 ohm of resistance, or fluctuation in your ohms reading, some modifications to the sensor ground harness will be necessary.

My question is about the reading on the multimeter. I am not sure if it is below or upper than 1 ohm ...