Removing the front bumper.
CF Veteran
Joined: Sep 2009
Posts: 3,612
Likes: 0
From: West Valley
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
My 98 had bolts attaching the brackets to the Uni-body (15mm) and 4 Torx holding the bumper to the brackets. My suggestion, if your ditching the bumper, just unbolt the brackets and be done with it.
Last edited by Desert Rat; Jul 11, 2011 at 10:56 PM. Reason: Poor spelling bugs me
CF Veteran
Joined: Jan 2011
Posts: 11,176
Likes: 1
From: Ohio
Year: 1995
Model: Cherokee
Engine: 4.0
Originally Posted by Desert Rat
My 98 had bolts attaching the brackets to the Uni-body (15mm) and 4 Torx holding the bumper to the brackets. My suggestion, if your ditching the bumper, just unbolt the brackets and be done with it.
Seasoned Member
Joined: Jun 2010
Posts: 397
Likes: 1
From: Illinois
Year: 1995
Model: Cherokee
Engine: 4.0 HO
the bumper bracket to the unibody is 6 15 mm bolt the bumper skin to the bumper brackets is 4 torx
if the OP ment torx instead of allen key then i agree unbolt it from the unibody and be done no need to unbolt the skin from the brackets unless your replacing the skin for some reason
if the OP ment torx instead of allen key then i agree unbolt it from the unibody and be done no need to unbolt the skin from the brackets unless your replacing the skin for some reason
Registered Users
Joined: Sep 2010
Posts: 1,354
Likes: 1
From: Elkhart I.N.
Year: 1987
Model: Cherokee
Engine: 4.7L
Originally Posted by Flash
Mine were torx, didn't have torch, so I squared the head up with a dremmel tool with a cutting wheel, then used a good vice grip to turn it out, replaced them with 15 mm bolts.
Sent from my DROID2 GLOBAL using Cherokee Forum
Thread
Thread Starter
Forum
Replies
Last Post
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Aug 30, 2015 08:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)