Remove the heat blower
Thread Starter
Member
Joined: Oct 2009
Posts: 201
Likes: 0
Year: 1991
Model: Cherokee
Engine: 4.0 stock
I know this is a small question but since I have never done it. I would like to know Do you have to take it from under the dash or out from under under the hood.
Please ask a moderator to move this thread topic to the appropriate area which is currently in the "for sale" area.
OP I would suggest you conduct a search for heater or blower because I believe this has been covered. I also recommend that you list your vehicle info (model, year, etc) when solliciting information as well.
Good luck in your search
OP I would suggest you conduct a search for heater or blower because I believe this has been covered. I also recommend that you list your vehicle info (model, year, etc) when solliciting information as well.
Good luck in your search
Seasoned Member
Joined: Jan 2011
Posts: 309
Likes: 0
From: Wrightstown, NJ
Year: 1986 Comanche
Engine: Chevy 350
The blower motor is accessed from under the hood, it's on the passenger side, right up against the firewall. There will be a little rubber drip tube, the wiring connector and three bolts that hold it in. I believe those bolts were 8mm (assuming I remember correctly).
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
For others who notice mistakes like this... please report them so we can get them moved... thanks!
OP please pay attention to where your posting... thanks
Cf staff
OP please pay attention to where your posting... thanks
Cf staff
Senior Member
Joined: Jan 2011
Posts: 730
Likes: 2
From: Joliet, Il
Year: 1996
Model: Cherokee
Engine: HO4.0 I6
These are some pictures off of my phone.
I had to remove the washer bottle in my 96xj to gain access.
The other picture is what you can expect to see. Other than that everything else is self explanatory.
And just a heads up if your set up is like mine it is not bolted in with the fuse box, it merely slides off that bolt. You will understand when you get down there.
I had to remove the washer bottle in my 96xj to gain access.
The other picture is what you can expect to see. Other than that everything else is self explanatory.
And just a heads up if your set up is like mine it is not bolted in with the fuse box, it merely slides off that bolt. You will understand when you get down there.
Last edited by xj guy; Feb 10, 2011 at 01:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
Mar 17, 2022 02:15 PM
corcan1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Oct 4, 2015 06:18 PM
shotseven
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 6, 2015 03:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




