Rear Wheelbearing Replacement
02-06-2011, 11:15 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2009
Location: Carbondale, Illinois
Posts: 853
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: Inline 6
Rear Wheelbearing Replacement
Hey guys, so the driver rear wheel bearing on my 2000 is starting to howl. My question is, does the bearing differ depending on the axle?
While doing some research i found that there are types that are pressed onto the axle shaft itself and there are ones that are pressed into the axle housing.
Is the 8.25 one way and the D35 the other? Which is which?
I looked it up on alldata, but it said that they're both pressed into the axle housing. Just making sure.
While doing some research i found that there are types that are pressed onto the axle shaft itself and there are ones that are pressed into the axle housing.
Is the 8.25 one way and the D35 the other? Which is which?
I looked it up on alldata, but it said that they're both pressed into the axle housing. Just making sure.
02-06-2011, 11:43 PM
#3
Senior Member
Thread Starter
Join Date: Aug 2009
Location: Carbondale, Illinois
Posts: 853
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: Inline 6
if i remember correctly the 8.25 u-bolts are 3in and the D35 are around 2.5in?
Because idr which axle i have.
Because idr which axle i have.
Thread
Thread Starter
Forum
Replies
Last Post
investinwaffles
Modified XJ Cherokee Tech
11
05-18-2021 12:02 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)