Rear Turn Signals- Left doesn't work Right Flashes both
#1
Member
Thread Starter
Join Date: Feb 2012
Location: Indeoendence, OR
Posts: 188
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Rear Turn Signals- Left doesn't work Right Flashes both
1987 XJ 2.5L Front signals work just fine however on the rear my left signal doesn't work. My right signal works but flashes both right and left signals. Metered the wires. What was originally the left signal wire now only has power when I put the switch to signal right. Looks like my brake lights aren't working anymore either. Im hitting a brick wall here guys could really use a hand.
#2
Member
Thread Starter
Join Date: Feb 2012
Location: Indeoendence, OR
Posts: 188
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
I did also remove the trailer wiring harness but I do not see how that would mix up left and right signals but stranger things have happened
#3
Member
Thread Starter
Join Date: Feb 2012
Location: Indeoendence, OR
Posts: 188
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
New update had the wrong wire for the left signal but its only pushing 2 volts the brake lights work but the brake light wire on the left flashes with right signal. What is going on!!
#7
Member
Thread Starter
Join Date: Feb 2012
Location: Indeoendence, OR
Posts: 188
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Yes that is where the old trailer harness was tapped into. I have already replaced the turn signal switch. I will look at the grounds. Little more info. I did swap out the lights with a combo stop/turn/tail led housing. and yes i put the proper flasher for led lights in as well. Simple project turned to PITA this thing is royally pissing me off
Trending Topics
#11
Member
Thread Starter
Join Date: Feb 2012
Location: Indeoendence, OR
Posts: 188
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Been doing more reading through dozens of threads a few of them mention a trailer relay? Does that mean I screwed myself by removing the trailer harness?
#13
Herp Derp Jerp
Join Date: Nov 2011
Location: Parham, ON
Posts: 18,251
Likes: 0
Received 13 Likes
on
12 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
No idea here - it's certainly not OEM. I've not torn into my harness.
Trailers use combined turn/stop/tail so maybe that was making things work before.
Trailers use combined turn/stop/tail so maybe that was making things work before.
#14
Member
Thread Starter
Join Date: Feb 2012
Location: Indeoendence, OR
Posts: 188
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Oh did I post this in the wrong section? If I did my bad. I figured it would be a simple project not a complere PITA