rear side windows
#1
Newbie
Thread Starter
Join Date: Dec 2008
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
rear side windows
Hi all: My 2000xj is starting to show some rust under rear side window rubber. Does anyone know how to remove rubber w/o distroying it so I can take care of rust Thanks for any help jerrops
#2
Junior Member
Join Date: Jul 2012
Location: Alabama
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
I took the left rear out of my "donor" to replace my daily driver's that was shattered by a six-point buck committing hari kari into my left rear quarter. Just search it on here for plenty of instruction and pics but i just started prying mine out in a corner with a couple flat edges (used a few butter knives too). If i remember correctly, I started in the top corner closest to the front and I worked from the inside. Use even steady pressure and just go slow. Have somebody outside to support it so it doesn't fall out when it finally lets go. There is no sealant holding it in...just pressure. Btw, mine is a '99. Be careful not to tear the gasket and you can reuse it fine.
Thread
Thread Starter
Forum
Replies
Last Post
Rotorhead
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
09-23-2023 04:17 PM
RunnerInPink
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
25
10-10-2017 10:34 AM
hpwrestler220
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
03-03-2017 01:13 AM
ammonllewis1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-31-2015 11:27 AM
SlickXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-29-2015 09:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)