okay all you guys that say cuttin floor boards is stupid, think about this, say maybe you need shocks in 10000 miles, and you snap some bolts off again, hey look at that you already have your hole in the floor board to fix the problem, besides that the holes are only like 2x2 inches and makes it really easy

 

You're right, everyone else is wrong..........okay?

 

Has anybody had any problems with a CKP Sensor? My 99 Cherokee will start after it goes through all the bells & whistles, then I have to turn the key twice to get it to start. Thanks,Dennis

 

totally not the right place to post that - but your issue is likely the fuel pump check valve. Quite a common issue.

 

When mine broke off I got some new grade 8 bolts and welded them in place where the old bolts were. Works great!

 

I must be a lucky one. No pb blaster and hand tools and no broken bolts.

 

http://www.ebay.com/itm/JEEP-CHEROKE...#ht_1790wt_905

 

Dang those look awesome. I want em. You have personal experience with them?

 

I've seen these on eBay before they look great I know I'll buy a pair if I need new mounts

 

Couldn't hurt to replace and do some routine maintance

 

you need 4 5/16 grade 8 bolts 1&1/2 inches long with nut and lock washer.
good luck.