Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Rear hatch rattle!!!!

Thread Tools
 
Search this Thread
 
Old 12-16-2010, 06:00 PM
  #1  
Junior Member
Thread Starter
 
greengiant0311's Avatar
 
Join Date: May 2008
Location: Colorado Springs CO
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
Year: 96
Model: Cherokee
Engine: 4.0
Default Rear hatch rattle!!!!

I have a 96 XJ. the rear hatch is about to make me crazier than I already am. Just ask my friends

I have adjusted the latch mechanism to no avail. It keeps rattling! Will replacing the struts get rid of the issue?
Old 12-16-2010, 06:03 PM
  #2  
CF Veteran
 
freegdr's Avatar
 
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes on 22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

no, has to be latch adjustment or something in the hatch
Old 12-16-2010, 06:12 PM
  #3  
CF Veteran
 
TheJerm's Avatar
 
Join Date: Jun 2010
Location: Flint/Asheville
Posts: 2,501
Likes: 0
Received 4 Likes on 4 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Default

did you remove the plastic hatch cover thingy and check to see if the latch is still tight to the hatch. Be careful cause you will probably break the plastic retainers
Old 12-16-2010, 06:26 PM
  #4  
Do you hear banjos?
 
COSXJFAN's Avatar
 
Join Date: Apr 2008
Posts: 9,644
Likes: 0
Received 6 Likes on 3 Posts
Model: Cherokee
Default

Originally Posted by greengiant0311
I have a 96 XJ. the rear hatch is about to make me crazier than I already am. Just ask my friends
Quoted for truth!!
Old 12-16-2010, 10:16 PM
  #5  
Registered Users
 
MATT 87 CHEROKEE's Avatar
 
Join Date: Sep 2010
Location: Elkhart I.N.
Posts: 1,354
Likes: 0
Received 1 Like on 1 Post
Year: 1987
Model: Cherokee
Engine: 4.7L
Default

From years of use the loop that the gate hooks into tends to wear out, cheap fix duct tape around the loop
Old 12-17-2010, 06:42 AM
  #6  
Junior Member
Thread Starter
 
greengiant0311's Avatar
 
Join Date: May 2008
Location: Colorado Springs CO
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
Year: 96
Model: Cherokee
Engine: 4.0
Default

I'm going to try bending the catch a lil bit and see if that works, if not I'm trying the duct tape.
Old 12-17-2010, 06:53 AM
  #7  
Junior Member
 
jeepman156's Avatar
 
Join Date: Jun 2010
Location: Birmingham, AL
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Let me know how it works cause my 98's about to drive me nuts. I almost don't wanna listen to my subs cause it rattles so bad
Old 12-17-2010, 09:11 AM
  #8  
CF Veteran
 
Diesel's Avatar
 
Join Date: Aug 2010
Location: Wantage, NJ
Posts: 2,112
Likes: 0
Received 4 Likes on 3 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 I6
Default

Open hatch, locate the rubber stops, pull off the rubber part, adjust bolt under it two turns out on each side, put rubber stops back on, close hatch.
Old 12-17-2010, 09:42 AM
  #9  
Member
 
blasto9000's Avatar
 
Join Date: Dec 2010
Location: Los Angeles, Calif.
Posts: 105
Likes: 0
Received 1 Like on 1 Post
Year: 1989
Model: Cherokee
Engine: 242
Default

You can “beef up” the hatch weather seal by putting a small slit in it, lube the inside with silicone, and then pull a piece of tight-fitting silicone hose through it. Or replace the weather seal with a new one.

However, the real problem is the area of the hatch lid that has the latching mechanism on it. The sheet metal is thin, so even if you have tight seals, the added force against the latch flexes the sheet metal and you still have a rattle.

The only correct way I can see to fix this is to back the sheet metal in the hatch with more metal.
The following users liked this post:
Hipps1981 (05-18-2022)
Old 12-17-2010, 05:35 PM
  #10  
Junior Member
Thread Starter
 
greengiant0311's Avatar
 
Join Date: May 2008
Location: Colorado Springs CO
Posts: 60
Likes: 0
Received 0 Likes on 0 Posts
Year: 96
Model: Cherokee
Engine: 4.0
Default

Originally Posted by Diesel
Open hatch, locate the rubber stops, pull off the rubber part, adjust bolt under it two turns out on each side, put rubber stops back on, close hatch.
DING DING DING! Diesel u are the stuff! That worked, no noise except for tools now

My girlfriend thanks you too
Old 12-17-2010, 06:44 PM
  #11  
Member
 
Reefmike's Avatar
 
Join Date: Jul 2010
Location: Fort Worth, Texas
Posts: 236
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 242/4.0 I6
Default

Originally Posted by Diesel
Open hatch, locate the rubber stops, pull off the rubber part, adjust bolt under it two turns out on each side, put rubber stops back on, close hatch.
I replaced the bumpstops on mine too.

Last edited by Reefmike; 12-18-2010 at 07:22 AM. Reason: spelling
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jeefersjeepers
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-20-2023 12:51 PM
T-Roy-TX
Modified XJ Cherokee Tech
4
10-31-2015 12:14 AM
donp815
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
09-14-2015 10:46 AM
canada_man
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-04-2015 11:05 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Rear hatch rattle!!!!



All times are GMT -5. The time now is 09:09 PM.